Ad template

Split-screen ad template: show both halves at once

A split-screen ad cuts one frame into two panes that play at the same time: the usual way in one half and your product in the other, or a person talking above a demo below. The eye compares them before anyone reads a word. Here's how to choose the two halves, lay them out and find the pairing that sells.
Live template
SStrydraSponsored
The problem

Kilometre 8 in flat, worn-out trainers

The fix

Kilometre 8 in Strydra: same run, more bounce

STRYDR
Everyday running shoeShop runners

Make it yours

Type your own words and pick your colour — the split-screen ad updates as you go.

#E4572E
Nothing you type is saved or sent anywhere.
SStrydraSponsored
The problem

Kilometre 8 in flat, worn-out trainers

The fix

Kilometre 8 in Strydra: same run, more bounce

STRYDR
Everyday running shoeShop runners

Live preview · fictional brand

What makes it work

  1. 1

    Top pane

    The familiar half: the old trainers, the usual method or a person reacting. It sits on a darker, plainer ground so the eye moves on to the pane below.

  2. 2

    Pane labels

    A two- or three-word tag in each half. The mock-up's read “The problem” and “The fix”. In your own ad they can say anything short, such as “Most runs” and “With Strydra”.

  3. 3

    The divider

    A hard line straight across the frame, with no fade and no overlap. A clean cut tells viewers to compare, and it keeps each half readable on its own.

  4. 4

    Bottom pane

    Your product doing the same job at the same moment, in your brand colour, with one line that names the difference in parallel words.

  5. 5

    Product and CTA

    The product shown in your pane only, and a button that carries the comparison on, such as “Shop runners” or “See both”.

Use it when…

  • Differences you can watch happen: grip, creasing, spills, glare, mess, soil drying out.
  • Video, where both halves play in the same seconds and nobody can say one was filmed later.
  • Pairing a talking person with a demo, so the explanation and the proof arrive together.
  • Products that replace a habit people already have, where the usual way is easy to film.

Skip it when…

  • Differences that need a caption to notice. If the two panes look the same at a glance, the layout has nothing to do.
  • Showing a named competitor's product in the other pane, which invites trademark complaints and public disputes.
  • Changes to a face or body. Two people in two panes is a before and after in disguise, with the policy problems covered on the before and after page.

14 hooks to steal

Fill the [brackets] with specifics from your product — and only claims you can prove.

150 more in the hook bank
  • Same [moment], two very different [results]
  • Top: [the usual way]. Bottom: [product].
  • Watch both halves at [minute/kilometre/hour]
  • We filmed both [products] in one take. Watch the [detail].
  • Which half looks like your [morning/commute/kitchen]?
  • [Product] on one side, the thing it replaces on the other
  • Same [weather/room/run], two [jackets/lamps/shoes]
  • Guess which half is [product] before the label appears
  • Left: [old habit]. Right: [new habit]. Same [time].
  • Pause at [second] and look at the [bottom/right] half
  • I explain up top. [Product] proves it below.
  • [Number] seconds, two [products], one [surface]
  • Your [routine] up top, the [brand] version underneath
  • Both halves cost about [amount]. Only one [benefit].

The same template, three other products

  • LLullowSponsored
    The problem

    2am in polyester pyjamas, duvet on the floor

    The fix

    2am in Lullow cotton-linen, duvet still on

    LULLOW
    Cotton-linen pyjama setShop sleepwear

    Sleepwear: For clothing, film both panes in the same bedroom with the same light so only the fabric changes. Keep the claim to the fabric, such as light or breathable, and stay away from promises about sleep itself.

  • CClaymarshSponsored
    The problem

    Plastic pot, soil still soggy on day four

    The fix

    Claymarsh terracotta, dry on top by day four

    CLAYMARSH
    Terracotta planterShop planters

    Planters: Home and garden splits work best on one windowsill, with both pots watered at the same moment. The shared light and timing are what make your pane believable.

  • SSolvaneSponsored
    The problem

    Plated hoops after a month of daily showers

    The fix

    Solvane sterling, same month, still bright

    SOLVA
    Sterling silver hoopsShop hoops

    Jewellery: Jewellery buyers doubt how long a finish lasts. A split filmed after the same weeks of wear makes that visible, but only if both pairs really went through it. Compare against plated jewellery in general, never a named brand.

When to split the frame

A single image asks the viewer to imagine the difference. A split screen shows it. Put the familiar version in one pane and yours in the other, let them play through the same seconds, and the comparison is finished before anyone reaches the caption.

That makes split screens strongest when the difference is something you can watch: a duvet kicked off at 2am next to one still on the bed, soil that stays wet next to soil that dries, a plated hoop that dulls next to a silver one that stays bright. It also suits a second kind of ad, where a person explains in one pane while the product works in the other. In editing terms the talking pane is the A-roll and the demo the B-roll, except both run at once. The talk keeps people watching and the demo makes the talk believable.

Split screens sit between two other templates. A before and after shows one situation at two different times. An us vs them ad lists differences in two columns of text. A split screen shows two things happening in the same moment, which is why it shines as video and why "at the same time" is its main selling point.

Stacked or side by side

Which way you cut the frame depends on where the ad will run.

  • Stacked, top and bottom, suits 9:16 Reels and Stories. Cut a 1080 by 1920 frame in half and each pane is 1080 by 960, close to square, so a phone clip fits without heavy cropping. As of October 2026, Instagram's guide How to make Instagram Reels: the complete 2026 guide (opens in a new tab) names split screen and side-by-side as separate Remix layouts, so both shapes already turn up in organic Reels.
  • Side by side, left and right, suits 1:1 and 4:5 feed images. The panes come out tall and narrow, so each holds a standing product and a two-line caption, not a wide scene.

Keep the split at 50/50 when the point is a fair comparison. When one pane is a person talking and the other is a demo, give the demo the larger share, around 60/40, because it carries the proof. Keep text off the divider and clear of the app's buttons. The safe zone checker shows where those sit at 9:16.

Pairings a camera can catch

The hard part is finding two halves that differ visibly while everything else stays the same. These pairings work because the shared condition is easy to control.

Product The familiar half Your half What both halves must share
Rain jacket An umbrella held in a fan's side wind and a hose's spray The jacket, hands free, in the same wind and spray Same fan, same hose, same seconds
Desk lamp A bare ceiling bulb over a laptop The lamp over the same laptop Same room, same time of evening, same camera exposure
Lunch box A takeaway tub tipped on its side The lunch box tipped the same way Same curry, same fill level, same tilt
Phone grip A bare phone held one-handed on a bus The phone with the grip, same hand Same rider, same route, filmed on the same trip
Planter A plastic pot on a windowsill The terracotta pot beside it Watered together, filmed together on day four

Each row has the same shape: one condition you set up once, two products that go through it together. If you can't name the shared condition, the comparison isn't ready to film.

How to build one, step by step

  1. Pick a difference a camera can catch. Grip, creasing, spills, glare, drying time. If you'd have to describe it in words, pick another.
  2. Choose a fair other half. The thing people use now, as a category: worn-out trainers, polyester pyjamas, plated hoops. Never a rival's packaging.
  3. Match everything else. Same light, same angle, same surface, same moment. Better still, film both products in one take, side by side, and cut the frame in the edit, so nobody can say one half was staged later.
  4. Label each pane. Two or three words in a corner, so viewers know which half is yours before the product appears.
  5. Write one line per pane in parallel words. "Kilometre 8 in worn-out trainers" over "Kilometre 8 in Strydra" makes the contrast sharper than two unrelated captions.
  6. Give your half the colour. The familiar pane stays plain and neutral. Your pane gets the brand colour and the product, so the eye finishes there.
  7. Pull a still from the video. The frame where the difference is clearest becomes a feed image. Choose it the way you'd choose a first frame for the video itself.

What to test

The pairing is the concept, so start there. For Strydra, "worn-out trainers vs Strydra", "minimal shoe vs Strydra" and "a runner talking up top, a foam squash test below" are three different arguments. Run those first with the execution held the same.

Once a pairing wins, change one thing at a time:

Test Version A Version B
Orientation Stacked for Reels Side by side for feed
Pane order Familiar half on top Your half on top
Labels "Most runs" and "With Strydra" No labels, the product reveals it
Format Video with both panes moving Still of the clearest frame
Opening Silent demo A spoken line over both panes

Read the results by pairing as well as by ad. If the talking-runner split wins, your buyers want an explanation alongside the proof, and that is worth carrying into the next batch of every template. The creative testing matrix guide shows how to lay out a grid like this so each ad answers a single question.

Making split screens in bulk with BulkAds

BulkAds makes still ads and adds motion to product scenes. It does not edit two filmed clips together or take video uploads, so a video split of two real takes is an edit you make yourself and run from Meta Ads Manager.

What it does handle:

  • Still splits from your instructions. Describe the layout in a batch ("frame split top and bottom by a hard white line, upper half plain grey with a pair of worn-out trainers, lower half in brand orange with the Strydra shoe, one short parallel line in each half") and the batch follows it, with a different pairing or line in each ad.
  • Your real product in your pane. That half is built from your actual packshot, and the pre-flight check flags any ad where the shoe, label or colour drifted from the photo.
  • Both orientations. Ask for 9:16 for the stacked version and 4:5 or 1:1 for side by side, then test them together.
  • Copy that continues the comparison. The ad copy generator writes a headline and primary text that add to the two panes instead of repeating them.
  • Stills and motion, launched together. Launch the still splits and their AI-video versions paused with the bulk ad launcher, and group results by format in creative analytics to see whether the moving split or the still split is selling.

A worked example: twelve still splits in one batch use 24 credits, and turning the best one into a short motion version costs 20 credits more. That is a cheap way to learn whether a pairing deserves a proper two-camera shoot.

Common mistakes

  • Two panes that look alike. If the difference needs zooming to see, the format has nothing to show.
  • Different conditions. Morning light in one pane and evening in the other invites the question "what else changed?"
  • Too much text. One line per pane. Each pane is half a phone screen, and a paragraph in each is unreadable.
  • A strawman other half. A deliberately terrible "usual" product makes the whole ad feel rigged.
  • The divider in the wrong place. A cut through the product or through a face looks like a glitch, not a layout.

Questions people ask

What is a split-screen ad?

An ad that divides one frame into two panes shown at the same time, usually the familiar way in one half and your product in the other, or a person talking above a product demo. It lets viewers compare without reading.

Is a split-screen ad the same as a before and after ad?

No. A before and after shows one situation at two different times. A split screen shows two things in the same moment, such as two pairs of shoes on the same run, which is why it works so well as video.

Should the split be top and bottom or left and right?

Top and bottom for 9:16 Reels and Stories, where each pane ends up close to square. Left and right for square and 4:5 feed images. If the ad runs in both places, make both and test them.

Can I show a competitor's product in the other half?

It's safer to show a category, such as plated hoops or worn-out trainers, than a named brand. A specific rival brings trademark and fairness questions, and every claim would have to be true of that exact product.

Can BulkAds edit two video clips into a split screen?

No. It makes still split-screen ads from your instructions and your real product photo, and can add gentle motion to them. A split of two filmed takes is an edit you make yourself and run from Meta Ads Manager, since BulkAds takes image uploads only.

Keep going

Every brand, person and review in these mock-ups is fictional. In your own ads, use only real reviews, real numbers and claims you can back up.

BulkAds AI is an independent product and is not affiliated with, endorsed or sponsored by Meta Platforms, Inc. Facebook and Instagram are trademarks of Meta Platforms, Inc.

More ad templates

Your next fifty ads are one link away.

Paste your website, meet your brand kit and see your first batch in minutes. 7 days for $9.99 — cancel anytime.

yourbrand.comMake my ads

See pricingExplore featuresBrowse the library