The short version
- A recent phone is enough: light, background and a steady phone matter far more than the camera.
- Shoot beside a window with the light diffused, white card opposite to fill the shadows, and the product on a plain background.
- Keep the whole product in frame and the label sharp and readable — AI tools can only keep what they can see.
- Glass, metal, clear liquids, clothing and jewellery each need one specific fix, mostly about controlling reflections.
- Run every photo through a short checklist before you upload it.
What a product photo has to do in an ad
Good product photography for ads starts with the job the photo has to do. An ad gets about a second on a phone screen while someone scrolls, and in that second it has to answer one question: what is this? That means the whole product, its label readable, its true colours and nothing competing with it.
If you'll use AI to build ads from the photo, it has a second job. It becomes the reference the AI works from — every new scene puts this exact product into it. Whatever is wrong in the photo, from a blurred label to a colour cast or a cropped cap, turns up in every ad made from it.
The most useful photo for both jobs is a clean packshot: the product alone, straight on, on a plain background. Lifestyle photos are nice to have. The packshot is the one you can't skip.
Your phone setup
You don't need a camera. The main camera on any recent phone has more resolution than a Meta ad needs. What you need is control over light and background, and that costs very little:
| Kit | What it does | Cheap version |
|---|---|---|
| Window | Your main light | Any window without direct sun on the table |
| Diffuser | Softens light and reflections | Baking paper, a white shower curtain or a thin white sheet |
| Reflector | Fills in shadows | White card, foam board or printer paper |
| Black card | Adds dark edges to glass and shiny products | Black chart paper |
| Background | A plain, unbroken surface | Large white or grey paper curved from wall to table (a sweep) |
| Support | Keeps the phone still | A small tripod, or a stack of books and the self-timer |
Then get the camera settings right:
- Wipe the lens. Phones live in pockets, and a smudge makes every shot soft and hazy.
- Never use the ultra-wide lens. Use the main 1× camera, or step back and use 2× or 3× if your phone has it. A longer view stops bottles and boxes bulging at the edges.
- Turn off flash and portrait mode. Flash causes hard glare, portrait mode's fake background blur often smudges the product's edges.
- Lock focus and exposure. On most phones, press and hold on the label until focus locks, then slide to adjust brightness.
- Switch on the grid to keep vertical lines straight.
- Use the self-timer so pressing the button doesn't shake the phone.
- Leave filters and beauty modes off. They change colours, and colours are a promise.
Light: window, diffusion and reflectors
Soft, even light shows the product as it really is. This setup works for most products:
- Put the table beside a window, with the light coming from one side of the product — not from behind it, and not from behind you.
- Diffuse it. Direct sun gives hard shadows and hot spots. Tape baking paper or a white curtain over the glass, or shoot on an overcast day, when the whole sky acts as a softbox.
- Fill the shadow side. Stand white card on the side away from the window, just out of frame. Move it closer for lighter shadows.
- Turn off the room lights. Warm bulbs mixed with cool daylight give the product two colours at once, and no edit fully fixes that.
- Check the label for glare. If a white streak crosses the text, turn the product a few degrees or move the card until it's gone.
Shoot a whole range in one session, at the same time of day, so the light matches from photo to photo. No usable window? Two inexpensive LED panels set to the same daylight colour, both diffused, one on each side, do the same job.
Backgrounds, angles and resolution
Backgrounds
- Plain, with no visible join: white, light grey or one flat colour. A curved sweep hides the line where table meets wall.
- Contrast with the product. A white jar on white paper loses its edges, so use light grey. Dark products look good on white.
- Pull the product forward, away from the background, so shadows fall softly and the background stays even.
- Clean everything. Dust, fingerprints and lint are invisible in the room and obvious at full size. A microfibre cloth and cotton gloves help with shiny products.
Angles
Shoot the set of angles you'll reuse again and again:
| Angle | How | Use it for |
|---|---|---|
| Front, straight on | Camera level with the middle of the product | The master packshot. AI tools work best from this |
| Three-quarter | Product turned 30–45 degrees | Depth, side panels, a second label |
| Top-down | Phone held flat above the product | Flat products, flat lays, sets |
| Detail | Close on texture, cap, stitching or clasp | Quality and craft |
| In hand | Held naturally, label to camera | Scale, and a UGC-style look |
Framing and resolution
- Leave space around the product, roughly a tenth of the frame on every side, so it can be recomposed for 4:5, 1:1 and 9:16 without cutting anything off. Our glossary explains aspect ratios if these are new to you.
- Never crop the product. Caps, lids, handles, straps and corners all stay in frame.
- Keep the label in focus. On tall products, focus on the label, not the cap.
- Keep at least 1000 pixels on the short side after cropping, and more if you can. Screenshots and images saved from marketplace listings are usually too small or too compressed.
- Move the originals, not copies. Chat apps such as WhatsApp compress photos by default. Send them as a document, or use a cable or a cloud drive.
Tricky products: glass, metal, clear liquids, clothing and jewellery
Most hard-to-shoot products are hard for one reason: they show you the room instead of themselves. The fixes are about controlling what they reflect.
Glass bottles and jars
Glass reflects the window and disappears at the edges. Diffuse the light heavily, then stand strips of black card on each side, just outside the frame. They draw clean dark lines down the edges of the glass that give it shape. Keep the camera level with the label so it doesn't look curved.
Metal, chrome and cans
Shiny metal mirrors everything, including you and your phone. Surround the product with white — a U of foam board, or a cheap light tent — and shoot through the gap on the self-timer while you stand to one side. Stepping back and using 2× makes any reflection of you smaller.
Clear liquids
Clear and pale liquids look grey and flat when lit from the front. Light them from behind instead: put white card behind the bottle, angled to catch the window light, so light passes through the liquid. Coloured liquids such as oils, serums and juices glow when backlit this way.
Clothing
Steam out creases and lint-roll every piece. Both show at ad size. Folded items work as flat lays. For shape, hang the garment against a plain wall or pin it at the back. Take a close-up of the fabric or print, and check colours against the real piece in daylight — a kurta that looks blue in the ad and arrives teal is a return waiting to happen. Our fashion ad examples show where these shots end up.
Jewellery
Small, shiny and full of detail. Use soft light from both sides, a clean white or dark background and a tripod. Use 2× or 3× from a little further back rather than pushing the phone close, focus on the stone or clasp, and wipe off fingerprints just before you shoot. Putty or a small stand keeps rings and earrings upright. Check that gold reads as gold, not yellow or orange.
Editing basics
Edit for accuracy, not drama. The photo is a promise about what arrives at the door.
- Straighten and crop. Vertical lines vertical, product centred, space left around it.
- Fix white balance first. Adjust warmth and tint until the white background looks neutral, not blue or yellow. Everything else follows from it.
- Set brightness carefully. Make the background bright without washing out the label. If the label's highlights turn pure white, pull back.
- Remove dust and specks with a healing or spot-fix tool. Don't retouch the product's shape, label or colours.
- Skip filters. They shift the product's colour, and that shift carries into every ad.
- If you cut out the background, check the edges at full zoom. A rough cut-out with halos or bitten edges is worse than a clean white background.
- Export at full size as a high-quality JPG or PNG, and name files by product, variant and angle: zesty-lemon-front.jpg, not IMG_4032.jpg.
Why AI tools get products wrong
When an AI ad tool mangles a product, the photo has usually left it guessing. The common failures, and what causes them:
| What goes wrong in the ad | Usual cause in the photo | Fix |
|---|---|---|
| Label text turns to gibberish | Small, blurred or glare-covered text | Sharper focus, softer light, full-resolution file |
| The product changes shape | Wide-angle distortion or an odd angle | Straight-on shot with the 1×–3× lens |
| Colours shift | Mixed light or a colour cast | Daylight only, neutral white balance |
| Parts go missing | Cap, handle or corner cropped out | Whole product in frame, with space around it |
| Props merge into the product | Hands, leaves or objects touching it | Photograph the product alone |
| The wrong item is used | Several products in one photo | One product per photo |
| Soft, smeary details | Low resolution or heavy compression | Original file, 1000 px or more on the short side |
Even from a perfect photo, image models can still change small details. That's why BulkAds' product photo ads compare every generated ad with your original photo — shape, label, text and colours — and flag the ones that drifted. It's also why you should look at every ad yourself before it spends money.
Pre-upload checklist
Run every photo through this before you upload it:
- One product, whole, nothing cropped
- Plain, clean background with no clutter
- Label sharp and readable when you zoom in
- No glare or reflections across the text
- Soft, even light with no hard shadows
- True colours: whites look white and the product matches real life
- Shot straight on with the 1×–3× lens, never the ultra-wide
- Space around the product for other sizes
- At least 1000 px on the short side, from the original file (not a screenshot or a chat-app copy)
- No dust, fingerprints, lint or creases
- File named by product, variant and angle
With a set of clean packshots ready, turn each one into a batch of different ads. Our guide to making 20 ads from one product photo shows how.
Questions people ask
Can I take product photos for ads with just a phone?
Yes. The main camera on any recent phone has more than enough resolution for Meta ads. Light, background and keeping the phone still make far more difference than the camera.
What is the best background for product photos?
A plain white or light-grey background, curved from wall to table so there's no visible join, suits most products. Use light grey rather than white for white products, so their edges don't disappear.
What resolution should product photos for ads be?
Keep at least 1000 pixels on the short side after cropping, and more if you can. Meta ads commonly use 1080 × 1350 for feeds and 1080 × 1920 for Stories and Reels.
How do I photograph glass or shiny products without reflections?
Diffuse the light, surround the product with white card so it reflects white instead of the room, and stand strips of black card beside glass to give its edges shape.
Why does AI change the label on my product?
Usually because the label wasn't clear in the photo: small text, blur, glare or an angled shot. A sharp, straight-on photo helps a lot, but check every generated ad against the real product.
Should I remove the background before uploading?
Not necessarily. A clean photo on a plain background works well as it is, and a rough cut-out with jagged edges can make results worse.
Keep going
- Features
Product photo ads
Your real packshot, in every scene
- Features
Brand kit
Colours, fonts and voice from your website
- Guides
Product photo ad ideas: turn one packshot into 20 ads
One clean packshot is enough for a full creative test. Eleven angles, how to brief each one, the sizes and copy to make, and how to launch 20 ads and learn from them.
- Guides
On-brand AI ads: how to keep every ad looking like you
AI makes ads fast, but drift creeps in at volume. What a brand kit needs, instructions that keep AI ads consistent, a pre-launch checklist and how to handle regulated claims.
- Ad examples
Jewelry ad examples
Gold jewelry ads for gifting, everyday wear and honest plating
- Glossary
Packshot
A packshot is a clean, well-lit photo of a product and its packaging, usually on a plain background. In ads it's the product's reference image — and in video, the closing frame that shows exactly what to buy.
Written by the BulkAds team. Published , last checked . Meta changes its tools often — if something here no longer matches Ads Manager, tell us at contact@bulkadsai.com.
BulkAds AI is an independent product and is not affiliated with, endorsed or sponsored by Meta Platforms, Inc. Facebook and Instagram are trademarks of Meta Platforms, Inc.